All Categories


How to install high-pressure hose joint

Time : 2022-09-02 Hits : 24

(1) Rubber hose in moving or stationary, can not be overly bent, can not bend at the root, at least 1.5 times the diameter of the beginning of the bending;


(2) When the rubber hose moves to the extreme position, it should not be pulled too tight and should be more relaxed;


(3) Try to avoid torsional deformation of rubber hose;


(4) hose as far as possible away from the thermal radiation component, it is necessary to fashion heat insulation board;


(5) The external damage of the rubber hose should be avoided, such as long-term friction on the surface of the same component in use;


(6) If the hose weight causes excessive deformation, there should be supporting parts.